|
Awlgrip 545 Cold Cure Accelerator
|
|
Awlgrip 545 Cold Cure Accelerator is a two component epoxy primer with outstanding corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates. 545 is also used to seal filler primers and fairing work before applying topcoats. It may be applied by spray, brush, or roller and may be used above or below the waterline.
*Ships Hazmat. A fee may apply*
|
|
Starting At:
$16.41
|
|
|
|
Additional Information
Type: Epoxy Polymide
Theoretical Coverage - 497 Sq. feet/gallon (46m2) at one mil dry (25 microns) 165 - 248 Sq. Feet (15 - 23m2) at recommended dry fil thickness. Calculated for mixed base and converter, reducer 25%.
Coverage calculations are based on theoretical transfer efficiency of 11%. Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application environment.
Recommended Wet Film Thickness: 7-10 mils (175-250 microns) 2 to 3 coats.
Recommended Dry Film Thickness: 2-3 mils (50-75 microns).
Recoatability: At 77ºF/50% R.H. Spray: minimum with itself 1 hour, with other product 12 hours. Brush/Roll: with itself 12-14 hours, with other products 12-14 hours. Maximum without sanding 24 hours. Sanding is recommended to improve adhesion and appearance. Overcoat with AWLGRIP®/AWLCRAFT® 2000 Topcoats. HIGH BUILD Epoxy Primer, AWL-QUIK Sanding Surpfacer and ULTRA-BUILD Primer.
VOC: White Base (D8001) - 435g/lt or 3.6 lbs/gallon
Gray Base (D1001) - 426 g/lt or 3.6 lbs/gallon
Converter (D3001) - 616 g/lt or 5.1 lbs/gallon
Spray Reducer (T0006)
Brushing Reducer (T0031)
COLD CURE™ Accelerator (M3066)
Equipement Cleaning (T0006, T0002 Reducers or M.E.K.)